Audi 100

1982-1990 of release

Repair and car operation




Audi 100
+ 1.1. Governing bodies and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. Exhaust system
+ 6. Power supply system
+ 7. Transmission
+ 8. Running gear
+ 9. Steering
- 10. Brake system
   10.1. Technical characteristics
   10.2. Adjustment of provision of a pedal of a brake
   10.3. Main cylinder of a brake
   10.4. Brake mechanism of a forward wheel of the Teves brand
   10.5. Brake mechanism of a forward wheel of the GIRLING brand
   10.6. Brake disk
   10.7. Case of a bracket and piston
   10.8. Drum-type brake mechanism of a back wheel
   10.9. Brake drum
   10.10. Wheel brake cylinder
   10.11. Disk brake mechanism of a back wheel
   10.12. Pressure regulator
   - 10.13. Parking brake
      10.13.1. Adjustment of the parking brake
   10.14. Anti-blocking system of brakes (ABS)
   10.15. Pumping of brake system
+ 11. Body
+ 12. Electric equipment


работа в Москве



10.13. Parking brake

GENERAL INFORMATION

Parking brake

1–longitudinal lever of a back suspension bracket;
2–clip;
3–adjusting nut;
4–equalizer;
5–protective cover;
6–arm;
7–axis;
8–lock ring;
9–switch of a control lamp of the parking brake;
10-gear sector;
11-doggie;
12-draft;
13-spring;
14-button;
15-handle;
16-шплинт;
17-casing;
18-axis;
19-draft of the equalizer;
20-plug;
21-lock ring;
22-holder;
23-sealant;
24-cable;
25-lever

Replacement of a cable of a drive of the parking brake (model with back drum-type brake mechanisms)

PERFORMANCE ORDER
1. To establish basic whetstones under forward wheels.
2. To weaken an inhaling of bolts of fastening of a back wheel.
3. To raise and establish on support a back part of the car.
4. To remove a wheel.
5. To remove a back brake shoe and to disconnect a cable tip from the driving lever (see fig. Drum-type brake mechanism of a back wheel).
6. To weaken an adjusting nut and to disconnect a cable from the equalizer.
7. To disconnect the holder from the longitudinal lever and to remove a cable, having taken out from the longitudinal lever a sealant.
8. To establish a new cable upside-down.
9. After installation to adjust the parking brake.