Audi 100

1982-1990 of release

Repair and car operation

Audi 100
+ 1.1. Governing bodies and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. Exhaust system
+ 6. Power supply system
+ 7. Transmission
+ 8. Running gear
+ 9. Steering
- 10. Brake system
   10.1. Technical characteristics
   10.2. Adjustment of provision of a pedal of a brake
   10.3. Main cylinder of a brake
   10.4. Brake mechanism of a forward wheel of the Teves brand
   10.5. Brake mechanism of a forward wheel of the GIRLING brand
   10.6. Brake disk
   10.7. Case of a bracket and piston
   10.8. Drum-type brake mechanism of a back wheel
   10.9. Brake drum
   10.10. Wheel brake cylinder
   10.11. Disk brake mechanism of a back wheel
   10.12. Pressure regulator
   + 10.13. Parking brake
   10.14. Anti-blocking system of brakes (ABS)
   10.15. Pumping of brake system
+ 11. Body
+ 12. Electric equipment

работа в Москве

10.9. Brake drum


The brake reel is accurate with a nave of a wheel and actually they are one detail. Removal and installation of a brake drum see in subsection 8.2.3.

Survey and defektovka

1. Carefully to clear a brake drum.
2. To measure by a calliper diameter of a working surface of a drum. The most admissible diameter of a drum of 231 mm. If it is necessary to replace diameter of more admissible, a drum. At existence рисок the drum can be chiseled, but taking into account that its final diameter of a working surface was no more admissible.
3. The most admissible radial palpation of a drum measured on a working surface, 0,1 mm, and minimum admissible axial palpation of 0,2 mm.