Audi 100

1982-1990 of release

Repair and car operation




Audi 100
+ 1.1. Governing bodies and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. Exhaust system
+ 6. Power supply system
+ 7. Transmission
+ 8. Running gear
+ 9. Steering
+ 10. Brake system
- 11. Body
   11.1. Removal and installation of the forward buffer
   11.2. Removal and installation of facing of a radiator
   11.3. Removal and cowl installation
   11.4. Adjustment of a cable of the lock of a cowl
   11.5. Replacement локаря
   11.6. Forward wing
   11.7. Molding replacement
   11.8. Replacement of a sealant of glass of a door
   11.9. A door upholstery (release cars till December, 1987)
   11.10. Replacement of glass of a door and window regulator
   11.11. Removal and door installation
   11.12. External handle of a door
   11.13. Door lock
   11.14. Adjustment of the lock of a door
   11.15. Removal and window regulator installation with the electric drive
   11.16. Removal and installation of an external rear-view mirror
   11.17. Replacement of a reflecting element of an external rear-view mirror
   11.18. Repair of a tokoobogrevatelny element of back glass
   11.19. Removal and installation of the back buffer
   11.20. Removal and installation of a cover of a luggage compartment
   11.21. Removal and installation of the lock of a cover of a luggage compartment
   11.22. Replacement of a back decorative slip with a niche under registration plate
   11.23. Removal and installation of the central console
   11.24. Cleaning of drains (on the models equipped with the hatch)
   11.25. Removal and heater installation
+ 12. Electric equipment


работа в Москве



11.1. Removal and installation of the forward buffer

GENERAL INFORMATION

Top fastening of the buffer

1–screw;

2–buffer


PERFORMANCE ORDER
1. To remove a decorative slip (1), having carefully picked up it a screw-driver.
2. To turn out five screws of fastening and to remove a decorative level, having picked up a screw-driver its ends (1 – a decorative level; 2–screw-driver).
3. To remove radiator facing (see subsection 11.2).
4. To turn out two screws of fastening and to remove a decorative lattice.
5. To disconnect a block with wires from fog lights.
6. To unscrew bolts of the top fastening of the buffer.
7. To unscrew bolts of the bottom fastening and to take out forward the buffer, having deduced it from the lateral directing.
8. If necessary to remove bearing plate (1) from the buffer (2). To insert a new bearing plate into the buffer and to latch plastic clips, having made big effort.
9. To establish the forward buffer upside-down.