Audi 100

1982-1990 of release

Repair and car operation




Audi 100
+ 1.1. Governing bodies and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. Exhaust system
+ 6. Power supply system
+ 7. Transmission
+ 8. Running gear
+ 9. Steering
+ 10. Brake system
- 11. Body
   11.1. Removal and installation of the forward buffer
   11.2. Removal and installation of facing of a radiator
   11.3. Removal and cowl installation
   11.4. Adjustment of a cable of the lock of a cowl
   11.5. Replacement локаря
   11.6. Forward wing
   11.7. Molding replacement
   11.8. Replacement of a sealant of glass of a door
   11.9. A door upholstery (release cars till December, 1987)
   11.10. Replacement of glass of a door and window regulator
   11.11. Removal and door installation
   11.12. External handle of a door
   11.13. Door lock
   11.14. Adjustment of the lock of a door
   11.15. Removal and window regulator installation with the electric drive
   11.16. Removal and installation of an external rear-view mirror
   11.17. Replacement of a reflecting element of an external rear-view mirror
   11.18. Repair of a tokoobogrevatelny element of back glass
   11.19. Removal and installation of the back buffer
   11.20. Removal and installation of a cover of a luggage compartment
   11.21. Removal and installation of the lock of a cover of a luggage compartment
   11.22. Replacement of a back decorative slip with a niche under registration plate
   11.23. Removal and installation of the central console
   11.24. Cleaning of drains (on the models equipped with the hatch)
   11.25. Removal and heater installation
+ 12. Electric equipment


работа в Москве



11.21. Removal and installation of the lock of a cover of a luggage compartment

PERFORMANCE ORDER
1. To open a cover of a luggage compartment.
2. To unscrew nuts of fastening and to remove the lock with laying from hairpins.
3. To disconnect draft from the lock lever, having wrung out the spring holder.
4. To disconnect the holder from a trunk lid.
5. To disconnect draft from the lever of the case of the cylinder.
6. To remove a decorative ring.
7. To unscrew two bolts of fastening and to remove the case of the switch of the lock with the cylinder.
8. For replacement of the cylinder of the lock it is necessary to take out a pin, to remove a washer and to take out the cylinder with the inserted key, the case of the cylinder and a spring from the case of the switch of the lock.
9. To put the lock upside-down.
10. To adjust the lock latch moving at the weakened bolts.