Audi 100

1982-1990 of release

Repair and car operation




Audi 100
+ 1.1. Governing bodies and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. Exhaust system
+ 6. Power supply system
+ 7. Transmission
+ 8. Running gear
+ 9. Steering
+ 10. Brake system
- 11. Body
   11.1. Removal and installation of the forward buffer
   11.2. Removal and installation of facing of a radiator
   11.3. Removal and cowl installation
   11.4. Adjustment of a cable of the lock of a cowl
   11.5. Replacement локаря
   11.6. Forward wing
   11.7. Molding replacement
   11.8. Replacement of a sealant of glass of a door
   11.9. A door upholstery (release cars till December, 1987)
   11.10. Replacement of glass of a door and window regulator
   11.11. Removal and door installation
   11.12. External handle of a door
   11.13. Door lock
   11.14. Adjustment of the lock of a door
   11.15. Removal and window regulator installation with the electric drive
   11.16. Removal and installation of an external rear-view mirror
   11.17. Replacement of a reflecting element of an external rear-view mirror
   11.18. Repair of a tokoobogrevatelny element of back glass
   11.19. Removal and installation of the back buffer
   11.20. Removal and installation of a cover of a luggage compartment
   11.21. Removal and installation of the lock of a cover of a luggage compartment
   11.22. Replacement of a back decorative slip with a niche under registration plate
   11.23. Removal and installation of the central console
   11.24. Cleaning of drains (on the models equipped with the hatch)
   11.25. Removal and heater installation
+ 12. Electric equipment


работа в Москве



11.9. A door upholstery (release cars till December, 1987)

GENERAL INFORMATION

Forward door

1–button of blocking of the lock;

2–socket of the internal handle of the lock of a door;

3–hand-rail;

4–window regulator handle;

5–internal upholstery

Removal

PERFORMANCE ORDER
1. To remove an internal overlay of a rear-view mirror.
2. To unscrew the button of blocking of the lock of a door.
3. To unscrew the button of blocking of the lock of a door.
4. To remove by means of a screw-driver a cap of the screw and, having turned out the fastening screw, to remove the socket of the internal handle of the lock of a door.
5. To remove a decorative overlay of a hand-rail, having picked up it a screw-driver, to turn out screws of fastening and to remove a hand-rail.
6. To remove the window regulator handle. For this purpose to wring out down an overlay of the handle and to turn out the screw of fastening of the handle.
7. To turn out on one screw of lateral top fastening from both parties of an upholstery.
8. To turn out the screw of the central fastening of the upholstery located under the internal handle.
9. To wring out by means of a screw-driver percussion caps of the bottom fastening and to remove an upholstery up.
10. If necessary to remove a protective film, previously having taken out three top percussion caps of its fastening.

Installation

PERFORMANCE ORDER
1. To establish, if acted in film, a protective film, having fixed it from above percussion caps. The damaged film to replace.
2. To establish an upholstery and to latch all bottom percussion caps of its fastening.
3. To screw the screw of the central fastening of an upholstery.
4. To screw on one screw of lateral top fastening from both parties of an upholstery.
5. To establish the window regulator handle.
6. To establish a hand-rail, to screw screws of its fastening and to insert a decorative slip.
7. To establish the socket of the internal handle of the lock of a door.
8. To wrap the button of blocking of the lock.
9. To establish an internal overlay of a rear-view mirror.