1982-1990 of release
Repair and car operation
- 1.1. Governing bodies and devices
+ 1.1.1. Release models till January of 1988 g
+ 1.1.2. Release models since January of 1988 g
1.2. Window regulators with the electric drive
1.3. An external rear-view mirror with the electric drive
1.4. Internal rear-view mirror
1.6. Forward seats with mechanical adjustment
1.7. Forward seats with the electric drive
1.8. Transportation of lengthy subjects
+ 1.9. Engine start
1.10. Precautionary measures at an engine stop
1.11. Cruise control
1.12. Heating and ventilation
1.13. Control panel conditioner
1.14. Board computer
1.15. Management of the board computer on release models till January, 1988.
1.16. Blocking of the internal handle of the lock of a back door
1.17. Car running in
1.18. Car check before departure
1.19. Replacement of operational liquids and lubricants
+ 1.20. Servicing of cars of release till August, 1985.
+ 1.21. Servicing of cars of release since August, 1985.
1.22. Periodicity of greasing of knots of the car
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. Exhaust system
+ 6. Power supply system
+ 7. Transmission
+ 8. Running gear
+ 9. Steering
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment
работа в Москве
Daily before departure from garage it is necessary to check:
1. Pressure of air in tires and if necessary to finish to norm.
2. Oil level in an engine case. It should be between min and max labels on the index (щупе) oil level. If level is lower than min label, to add oil in the engine. It is necessary to add oil of the same brand what is filled in in an engine case. To watch, that oil level in a case kept about max label. Not to fill in oil above max label: it will lead to the raised consumption of oil.
3. Liquid level in system of cooling of the engine. Level of cooling liquid should be about a label on a broad tank. If necessary to add cooling liquid in a broad tank.
4. Level of brake liquid in a tank of the main cylinder of a brake. It should be higher than min label. If necessary to add liquid in a tank to max mark.
5. To examine hoses and tubes of power supply systems, coolings and engine greasings. Podtekaniya of the fuel, cooling liquid and oil should not be. If there are podtekaniye traces, to tighten collars of fastening of hoses.
6. Serviceability of working brake system and parking brake.
7. Serviceability of instrumentations, screen wiper, washer of a windscreen, headlights, indexes of turns and back lamps. This check carry out at the working engine.