Audi 100

1982-1990 of release

Repair and car operation




Audi 100
- 1.1. Governing bodies and devices
   + 1.1.1. Release models till January of 1988 g
   + 1.1.2. Release models since January of 1988 g
   1.2. Window regulators with the electric drive
   1.3. An external rear-view mirror with the electric drive
   1.4. Internal rear-view mirror
   1.5. Cowl
   1.6. Forward seats with mechanical adjustment
   1.7. Forward seats with the electric drive
   1.8. Transportation of lengthy subjects
   + 1.9. Engine start
   1.10. Precautionary measures at an engine stop
   1.11. Cruise control
   1.12. Heating and ventilation
   1.13. Control panel conditioner
   1.14. Board computer
   1.15. Management of the board computer on release models till January, 1988.
   1.16. Blocking of the internal handle of the lock of a back door
   1.17. Car running in
   1.18. Car check before departure
   1.19. Replacement of operational liquids and lubricants
   + 1.20. Servicing of cars of release till August, 1985.
   + 1.21. Servicing of cars of release since August, 1985.
   1.22. Periodicity of greasing of knots of the car
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. Exhaust system
+ 6. Power supply system
+ 7. Transmission
+ 8. Running gear
+ 9. Steering
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment


работа в Москве



1.19. Replacement of operational liquids and lubricants

GENERAL INFORMATION

Engine oil is necessary for changing through 15 000 km of run at petrol engines and through 7500 km – at diesel. At the new car it is necessary to replace oil after the running in termination (through 1500 km). At oil replacement surely replace also the oil filter.

In a case of the engine it is recommended to fill in oil of the same brand what was in the engine. If oil of other brand is used, previously it is necessary to wash out system of greasing of the engine oil of that brand which will fill in in the engine. For this purpose it is necessary to merge old oil, to fill in new oil on 2–4 mm above min label on the index (щупе) oil level. To start the engine and let's to it work idling about 10 minutes. Then to merge oil, to replace filtering element of the oil filter and to fill in fresh oil.

Once a year check density of cooling liquid and if necessary add G11V8A concentrate. If there is no possibility to add a concentrate, it is recommended to change cooling liquid of 1 times in 2 years. It is necessary to mean that cooling liquid is poisonous, therefore it is impossible to suck in liquid a mouth at transfusion. At work with cooling liquid it is recommended to use goggles, not to smoke and not to accept food on a workplace. If liquid got on open sites of skin, them wash out water with soap.

Oil in a transmission is necessary for changing through 90 000 km of run. Through 15 000 km it is necessary to check oil level in a transmission and if necessary to add to norm. Oil level in KP should reach an opening of a jellied stopper. In a drive of coupling and a drive of brakes it is necessary to change brake liquid of 1 time in 2 years. It is recommended to carry out this operation in the spring, at the same time with the next maintenance. In drives of brakes and couplings are used brake FMVSS 116 DOT 4 liquid. Brake liquid is hygroscopic, therefore it store only in the closed container.