Audi 100

1982-1990 of release

Repair and car operation

Audi 100
+ 1.1. Governing bodies and devices
- 2. Technical characteristics
   2.1. Introduction
   2.2. Technical characteristics of cars
   2.3. Technical characteristics of petrol engines
   2.4. Technical characteristics of diesel engines
   2.5. Operational liquids
   2.6. Moments of an inhaling of responsible carving connections
   2.7. Tarirovochnye data of carburetors
   2.8. Nominal and repair sizes of details and limits admissible износов
+ 3. Engines
+ 4. Cooling system
+ 5. Exhaust system
+ 6. Power supply system
+ 7. Transmission
+ 8. Running gear
+ 9. Steering
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment

2. Technical characteristics

2.1. Introduction


The real Management is a grant on car repairs of Audi 100 of release from 1982 to 1992 and is intended for employees of service stations and repair shops. It can be to useful also individual owners of cars.

The management helps to reveal malfunctions of the car, methods of their elimination are considered.

Car repairs are based on replacement of faulty details and knots new.

Need of replacement of details is determined by tables of admissible gaps and износов. However it is necessary to mean that data on limiting wear of details have rough values and should not be considered as the unique criterion, without behavior of a detail in knot or the unit.

The Audi 100 car belongs to middle class and has an all-metal bearing body of type a sedan or the versatile person.

On cars the whole scale of four - and five-cylinder petrol engines from 1,8-liter by capacity of 100 h.p. to 2,23-liter with a turbo-supercharging in capacity of 200 h.p. is established.

Except petrol engines, for Audi 100 there is a family of diesel motors.

On the car establish four - and five-speed transmissions or automatic three-stage.

The base model of the car has front-wheel configuration, but there is also an updating with a full drive.

The steering – reechny type, is updatings with the amplifier of a steering.

Brake system – double-circuit with a hydraulic actuator, forward brakes – disk, back can be drum-type or disk (depending on engine capacity). Depending on a complete set the car can be equipped with ABS (anti-blocking system). At all updatings in system of brakes the amplifier is established.

On the car the safety steering column, a part of cars is applied (depending on a complete set) is equipped with an inflatable safety cushion for the driver.

The car has exclusive from the point of view of aerodynamics a body (at a sedan factor of Skh=0,3, at versatile person Skh=0,34). It is reached thanks to smooth contours of a body, without sharp transitions, to a big inclination of wind and back glasses, and also an original design of lateral windows. Glasses of lateral windows are established on a framework of doors outside, aflush with body racks. Such design in the world was applied for the first time on the serial car.

The great attention when developing a body was given to corrosion firmness. The details most subject to corrosion are executed from цинкрометалла; the details which are not bearing loadings, are made of plastic.