Audi 100

1982-1990 of release

Repair and car operation




Audi 100
+ 1.1. Governing bodies and devices
- 2. Technical characteristics
   2.1. Introduction
   2.2. Technical characteristics of cars
   2.3. Technical characteristics of petrol engines
   2.4. Technical characteristics of diesel engines
   2.5. Operational liquids
   2.6. Moments of an inhaling of responsible carving connections
   2.7. Tarirovochnye data of carburetors
   2.8. Nominal and repair sizes of details and limits admissible износов
+ 3. Engines
+ 4. Cooling system
+ 5. Exhaust system
+ 6. Power supply system
+ 7. Transmission
+ 8. Running gear
+ 9. Steering
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment


работа в Москве



2.6. Moments of an inhaling of responsible carving connections

GENERAL INFORMATION

Four-cylinder engines

Bolts of fastening of a head of the block of cylinders:
  – 1st stage
40 (4,0)
  – 2nd stage
60 (6,0)
  – 3rd stage
to tighten further on a half-turn (180 °)
Bolts of fastening of arms of an engine mount to the block of cylinders:
  – М10
45 (4,5)
  – М8
25 (2,5)
Nut of fastening of the mechanism of a tension of a belt of a drive of a camshaft
45 (4,5)
Bolt of fastening of a cogwheel to an intermediate shaft
80 (8,0)
Bolt of fastening of a pulley of a cranked shaft to a cogwheel of a cranked shaft
20 (2,0)
Bolt of fastening of a pulley of a cranked shaft to a cogwheel of a cranked shaft
20 (2,0)
Bolt of fastening of a cogwheel to a cranked shaft:
  – release cars till 1989.
200 (20,0)
  – release cars since 1989 (to put special glue):
     • 1st stage
30 (3,0)
     • 2nd stage
to tighten further on a turn quarter (90 °)
Bolt of fastening of a cogwheel to a camshaft
80 (8,0)
Nuts of covers of bearings of a camshaft
20 (2,0)
Bolt of fastening of a cover to a head of the block of cylinders
10 (1,0)
Nut of fastening of covers of shatunny bearings:
  – 1st stage
30 (3,0)
  – 2nd stage
to tighten further on a turn quarter (90 °)
Bolt of fastening of a flange of an epiploon of an intermediate shaft
25 (2,5)
Bolt of fastening of a cover of a forward epiploon of a cranked shaft
20 (2,0)
Bolt of fastening of a cover of a back epiploon of a cranked shaft
10 (1,0)
Bolt of fastening of a flywheel (driving disk)
100 (10,0)
Bolt of fastening of the oil filter
25 (2,5)
Bolt of fastening of the oil pump
20 (2,0)
Bolt of fastening of a cover of the oil pump
10 (1,0)
Bolt of fastening of a case
20 (2,0)

Five-cylinder engine

Bolt of fastening of a head of the block of cylinders:
  – 1st stage
40 (4,0)
  – 2nd stage
60 (6,0)
  – 3rd stage
to tighten further on a half-turn (180 °)
Bolts of fastening of arms of an engine mount to the block of cylinders:
  – М8
25 (2,5)
  – М10
45 (4,5)
Bolt of fastening of the water pump
20 (2,0)
Bolt of fastening of a pulley of a cranked shaft
350 (35,0)
Bolt of fastening of a cogwheel to a camshaft
80 (8,0)
Nuts of fastening of covers of bearings of a camshaft
20 (2,0)
Bolt of fastening of a cover of a head of the block of cylinders
10 (1,0)
Bolt of fastening of a cover of the radical bearing
65 (6,5)
Nuts of fastening of covers of shatunny bearings:
  – a nut with a washer
50 (5,0)
  – a nut with a groove:
     • 1st stage
30 (3,0)
     • 2nd stage
to tighten further on a turn quarter (90 °)
Bolt of fastening of a cover of a back epiploon of a cranked shaft
10 (1,0)
Bolts of fastening of the oil pump:
  – short bolts and rack
10 (1,0)
  – long bolts
20 (2,0)
Bolt of fastening of an intermediate pulley
10 (1,0)
Reduktsionny valve
40 (4,0)
Bolt of fastening of the oil filter (the engine with a turbo-supercharging)
70 (7,0)
Flanges of pipes of giving and oil plum (the engine with a turbo-supercharging)
25 (2,5)
Nuts of connection of the coupling of a hose of an oil radiator (the engine with a turbo-supercharging)
40 (4,0)
Bolt of fastening of a case
25 (2,5)

Cooling system

Nuts of fastening of a radiator (except the top arm of the five-cylinder engine)
20 (2,0)
Nut of fastening of a radiator to the top arm (the five-cylinder engine)
10 (1,0)
Nuts of fastening of the electrofan
10 (1,0)
Bolt of fastening of a cover of the thermostat
10 (1,0)

Power supply system and system of production of the fulfilled gases

Bolt of fastening of a fuel tank
25 (2,5)
Bolt of fastening of the fuel pump (the four-cylinder engine)
20 (2,0)
Nut of fastening of an inlet pipe
25 (2,5)
Nut of fastening of the carburetor
10 (1,0)
Nut of fastening of a final collector:
  – four-cylinder engine
25 (2,5)
  – five-cylinder engine
30 (3,0)
Nut of fastening of a turbokompressor
60 (6,0)
Nut of fastening of the valve of shutdown of a turbokompressor of an intermediate pipe
25 (2,5)
Nut of fastening of a reception pipe of the exhaust silencer
35 (3,5)

Ignition system

Spark plug
20 (2,0)
Nut or bolt of fastening of the holder of the distributor of ignition
15 (1,5)

Coupling

Bolt of fastening of a casing of coupling to a flywheel
25 (2,5)
Bolts of fastening of a case of coupling to the engine block:
  – cars with four-cylinder engines
55 (5,5)
  – cars with five-cylinder engines:
     • bolts М12
60 (6,0)
     • bolts М10
45 (4,5)
     • bolts М8
20 (2,0)
Bolt of fastening of a press disk
25 (2,5)
Bolt of fastening of a fork of switching off of coupling
25 (2,5)
Bolt of fastening of the directing plug of the vyzhimny bearing
15 (1,5)
Bolt of fastening of the main cylinder
25 (2,5)

Transmission


Bolt of fastening of support of a transmission to a body:
  – fashions. 013 and 014
45 (4,5)
  – fashions. 093, 016 and automatic
40 (4,0)
Bolt of fastening of support to a transmission
40 (4,0)
Nuts of a bolt of fastening of an arm of a suspension bracket to a transmission case
25 (2,5)
Bolts of fastening of the internal hinge of a shaft of a drive of a forward wheel to a target shaft of differential
45 (4,5)
Bolt of fastening of a case of a transmission to a coupling case
25 (2,5)
Bolt of fastening of a cover of differential
25 (2,5)
Bolt of fastening of a target shaft of differential
20 (2,0)
Bolt of fastening of an axis of the lever of a backing
35 (3,5)
Nut of the back end of a secondary shaft
100 (10,0)
Nut of fastening of the mechanism of gear shifting to a body floor
10 (1,0)

Forward and back suspension brackets

Nut of fastening of an amortizatorny rack to the top support
30 (3,0)
Nut of fastening of the top support
30 (3,0)
Lock nut of the piston of a rack
60 (6,0)
Carving cover of a rack
180 (18,0)
Nut of fastening are resistant to a spherical support
65 (6,5)
Bolt of fastening of the lever of a forward suspension bracket to a stretcher
85 (8,5)
Bolt of fastening of a stretcher to a body
110 (11,0)
Nut of fastening of the stabilizer of cross-section stability to the lever of a forward suspension bracket
110 (11,0)
Nut of fastening of a nave on a semi-axis
280 (28,0)
Bolt of fastening of a semi-axis to a transmission flange:
  – bolt М8
45 (4,5)
  – bolt М10
80 (8,0)
Nut of fastening of cross-section jet draft
90 (9,0)
Bolt of fastening of the lever of a back suspension bracket to a body
95 (9,5)
Nut of the bottom fastening of the back shock-absorber
90 (9,0)
Nut of the top fastening of the back shock-absorber
20 (2,0)

Steering

Nut of fastening of a steering wheel
40 (4,0)
Nut of fastening of a shaft of a steering to a lath gear wheel
25 (2,5)
Nut of fastening of a steering column
35 (3,5)
Nut of fastening of a case of a lath to a body
25 (2,5)
Bolt of fastening of steering bent for to a lath
60 (6,0)
Nut of fastening of the spherical hinge of steering draft
60 (6,0)
Nut of fastening of the pump of the amplifier of a steering:
  – four-cylinder engine
25 (2,5)
  – five-cylinder engine
20 (2,0)
Nut of fastening of a pulley of the pump of the amplifier
20 (2,0)

Brake system

Bolt of fastening of a bracket of a forward brake (Girling)
35 (3,5)
Directing pin (Teves)
25 (2,5)
Bolt of fastening of the mechanism of a forward brake to a board
125 (12,5)
Bolt of fastening of a bracket of a back brake
65 (6,5)
Bolt of fastening of a board of a drum-type brake
30 (3,0)
Nut of fastening of the main cylinder to the amplifier
25 (2,5)
Nut of fastening of the amplifier to a body
25 (2,5)

Electric equipment

Bolt of fastening of the generator
35 (3,5)
Bolt of fastening of the generator to an adjusting lath
20 (2,0)
Nut of fastening of a pulley of the generator
35 (3,5)
Nut of fastening of a starter
60 (6,0)