Audi 100

1982-1990 of release

Repair and car operation

Audi 100
+ 1.1. Governing bodies and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
- 5. Exhaust system
   5.1. Removal and installation of system of release
   5.2. Replacement lambda probe
+ 6. Power supply system
+ 7. Transmission
+ 8. Running gear
+ 9. Steering
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment

5.2. Replacement lambda probe


Types applied a lambda probes

1–not warmed probe;

2, 3 – warmed probes

There are three types a lambda probes, applied on Audi cars. At replacement it is necessary to establish only the same probe what stood on the car.

1. To disconnect the electric socket of a probe from a plait of wires.
2. To turn out a lambda probe (see fig. System of production of the fulfilled gases) from a final collector.
3. To grease with special VAG G5 greasing a carving new a lambda probe. To watch, that greasing did not get to cracks and probe openings. Not to touch hands a working part of a new probe, to protect it from pollution.
4. To screw a lambda probe in a final collector and to tighten the moment of 50 N · m (5,0 kgfs · м).
5. To connect the electric socket of a probe.