Audi 100

1982-1990 of release

Repair and car operation




Audi 100
+ 1.1. Governing bodies and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. Exhaust system
- 6. Power supply system
   - 6.1. Power supply system of carburetor engines
      6.1.1. Replacement of a filtering element of the air filter
      6.1.2. Removal and installation of the air filter
      6.1.3. Temperature regulator check
      6.1.4. Check of the valve of a temperature regulator
      6.1.5. Removal and installation of the fuel pump
      6.1.6. Check of pressure of forcing of the fuel pump
      6.1.7. Removal and installation of a cable of a drive of an accelerator
      6.1.8. Adjustment of a cable of a drive of an accelerator
      6.1.9. Fuel level sensor replacement
      6.1.10. Removal and installation of a fuel tank
      6.1.11. Replacement of the filter of thin purification of fuel
      6.1.12. Removal and carburetor installation
      + 6.1.13. Dismantling and carburetor assembly
      + 6.1.14. Pierburg 1B3 carburetor adjustments
      + 6.1.15. Pierburg 2Е2 carburetor adjustments
      + 6.1.16. Keihin carburetor adjustments
   + 6.2. A power supply system of engines with fuel injection
   + 6.3. Power supply system of the diesel engine
+ 7. Transmission
+ 8. Running gear
+ 9. Steering
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment





6.1.12. Removal and carburetor installation

GENERAL INFORMATION

Inlet pipe and engine carburetor in volume of 1,8 l

1–heater of an inlet pipe;
2–sealing ring;
3–laying;
4–inlet pipe;
5–collar;
6–hose of heating of the carburetor;
7–flange;
8–carburetor;
9–hose of a supply of fuel;
10-laying of an inlet pipe;
11-sealing ring

PERFORMANCE ORDER
1. To disconnect a wire from the "minus" plug of the storage battery.
2. To remove the air filter (see subsection 6.1.2).
3. To merge about a half of cooling liquid (see subitem 1–3 subsections 4.1).
4. To disconnect from the carburetor hoses of giving and plum of cooling liquid, electroconducting, an accelerator cable, fuel and vacuum hoses.
5. To unscrew nuts (or bolts) and to remove the carburetor from an inlet pipe. To remove carburetor laying.
6. To establish the carburetor upside-down.