Audi 100

1982-1990 of release

Repair and car operation




Audi 100
+ 1.1. Governing bodies and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. Exhaust system
+ 6. Power supply system
+ 7. Transmission
- 8. Running gear
   - 8.1. Forward suspension bracket
      8.1.1. Telescopic rack
      8.1.2. Shock-absorber replacement
      8.1.3. Removal and installation of the stabilizer of cross-section stability
      8.1.4. Nave of a forward wheel
   + 8.2. Back suspension bracket
+ 9. Steering
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment


работа в Москве



8.1.4. Nave of a forward wheel

Dismantling and assembly

PERFORMANCE ORDER
1. To remove a telescopic rack (see subsection 8.1.1).
2. To unscrew bolts of fastening and to remove a brake board.
3. Выпрессовать by means of a stripper a wheel nave from the bearing established in a rotary fist.
4. To remove on one lock ring from both parties of a rotary fist.
5. Выпрессовать the nave bearing from a rotary fist.
6. To collect a nave upside-down. At a bearing press fitting on a nave flange effort to apply only on an internal ring of the bearing. Bolts of fastening of a brake board to tighten the moment of 10 N · m (1,0 kgfs · м). After assembly to establish a telescopic rack into place.