Audi 100

1982-1990 of release

Repair and car operation




Audi 100
+ 1.1. Governing bodies and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. Exhaust system
+ 6. Power supply system
+ 7. Transmission
+ 8. Running gear
- 9. Steering
   9.1. Technical characteristics
   9.2. Steering wheel
   + 9.3. Steering column
   9.4. Steering mechanism
   9.5. Adjustment of the mechanism of a steering
   9.6. Steering draft
   9.7. Pump of the hydraulic booster of a steering
   9.8. Check of pressure of forcing of the pump of the hydraulic booster of a steering
   9.9. Pumping of system of the hydraulic booster of a steering
   9.10. Driving belt of the pump of the hydraulic booster
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment


работа в Москве



9.10. Driving belt of the pump of the hydraulic booster

Adjustment of a tension of a belt

PERFORMANCE ORDER
Models with the 5-cylinder engine
1. To weaken an inhaling of nuts of a bolt of fastening of the pump and a bolt of an adjusting level, and also an inhaling of a bolt of fastening of an adjusting level.
2. To adjust a belt tension turn in one party of an adjusting bolt. At correctly adjusted tension the belt should cave in on 10 mm by pressing a thumb on the top branch of a belt in the middle between pulleys.
3. After adjustment to tighten all carving fastenings.
Models with the 4-cylinder engine
4. To unscrew three nuts of fastening of a pulley, to remove an external half of a pulley and a drive belt from a pulley. To take out one of the adjusting washers established between halves of a pulley, to put on a belt a pulley, to establish an external half of a pulley and the removed adjusting washer on hairpins and to tighten fastening nuts.
5. To check a belt tension. At correctly adjusted tension the belt should cave in on 10 mm by pressing a thumb on the top branch of a belt in the middle between pulleys.
6. If the belt tension is not enough, to rearrange the following adjusting washer. To weaken a tension of a belt, washers need to be rearranged upside-down.