Audi 100

1982-1990 of release

Repair and car operation




Audi 100
+ 1.1. Governing bodies and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. Exhaust system
+ 6. Power supply system
+ 7. Transmission
+ 8. Running gear
- 9. Steering
   9.1. Technical characteristics
   9.2. Steering wheel
   + 9.3. Steering column
   9.4. Steering mechanism
   9.5. Adjustment of the mechanism of a steering
   9.6. Steering draft
   9.7. Pump of the hydraulic booster of a steering
   9.8. Check of pressure of forcing of the pump of the hydraulic booster of a steering
   9.9. Pumping of system of the hydraulic booster of a steering
   9.10. Driving belt of the pump of the hydraulic booster
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment


работа в Москве



9.8. Check of pressure of forcing of the pump of the hydraulic booster of a steering

PERFORMANCE ORDER
1. To unscrew bringing bolt and to disconnect from the pump bringing hose and to connect instead of it a hose with a manometer.
2. To start the engine and to leave to work it idling.
3. To turn out against the stop wheels in any party, to check pressure on a manometer and at once to turn wheels in a starting position. This operation should occupy no more than 30 with, otherwise the pump can fail. Pressure should be 14 500–15 500 kPas (145–155 kgfs/cm2).
4. If pressure differs from specified, it is necessary to replace the valve of a high pressure and to execute repeated check. If pressure does not correspond again to norm, the pump is faulty and it is necessary to replace it.